LED Akkutanklampe 10 W,Kippschalter, SMALL & HANDY
Canister - L 24cm / Ø 6cm
Head - L 10,5cm / Ø 5,3cm
L10 (Classic) - 10Watt 1050 lumens, Light-Emitting Diode (LED) primary lights are designed with fixed-focus light head and Li-Ion battery packs, available in the capacity range 5,2Ah. Used water-tight switch on/off with rubber cap.
The color temperature is about 6500°K, giving a light blue beam. Visibility of the spot is better even in shallow waters full of sunlight, making light communication between divers possible even in these conditions.The main feature of the head with a fixed focal length is concentrated (8°) beam of light with a distinct glow.
All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series.The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).
The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.
When the battery is switched on, the indicator lights in one of thefollowing modes:
green, continuous: 100 % – 16 % of charge capacityred, continuous: 15 % - 6 %red, intermittent: 5% – 0,1 %
TECHNICAL SPECIFICATIONS:
- fixed focus 8°- colour temperature: 6500°K- luminance: 1050lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- battery indicator- classic rubber cap switch- standard cable length 1,0m long (or according to customer's order)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs
Model
Capacity - Ah
Operating time – min
Canister - L / Ø - cm
Weight/ Weight in water - kg
Charging time – h
L1005
5,2
300
24 / 6
2,3 / 0,6
2
L20 (Classic) - 20Watt 1700 lumens, Light-Emitting Diode (LED) primary lights are designed with fixed-focus light head and Li-Ion battery packs, available in the capacity range from 10,4Ah to 27,2Ah. Used water-tight switch on/off with rubber cap.The color temperature is about 6500°K, giving a light blue beam. Visibility of the spot is better even in shallow waters full of sunlight, making light communication between divers possible even in these conditions.The main feature of the head with a fixed focal length is concentrated (10 °) beam of light with a distinct glow.All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series.The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).
TECHNICAL SPECIFICATIONS:
- fixed focus 10°- colour temperature: 6500°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,0m* long (or according to customer's order)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs
* option: E/O cord 1,0m (65cm/35cm) long (or according to customer's order)
Model
Capacity - Ah
Operating time – min
Canister - L / Ø - cm
Weight/ Weight in water - kg
Charging time – h
L2010
10,4
300
24 / 7,5
2,3 / 0,6
4
L2010 E/O
10,4
300
24 / 7,5
2,3 / 0,6
4
L2016
15,6
520
31 / 7,5
2,7 / 0,7
6
L2016 E/O
15,6
520
31 / 7,5
2,7 / 0,7
6
L2021
20,8
630
30 / 8
3,1 / 0,9
9
L2021 E/O
20,8
630
30 / 8
3,1 / 0,9
9
L2025
27,2
770
30 / 8
3,1 / 0,9
11
L2025 E/O
27,2
770
30 / 8
3,1 / 0,9
11
PERCH L20 (Piezo) - 20Watt 1700 lumens, Light-Emitting Diode (LED) primary lights are designed with fixed-focus light head and Li-Ion battery packs, available in the capacity range from 10,4Ah to 40,8Ah. Used water-tight piezo push-button switch.The color temperature is about 6500°K, giving a light blue beam. Visibility of the spot is better even in shallow waters full of sunlight, making light communication between divers possible even in these conditions.The main feature of the head with a fixed focal length is concentrated (10 °) beam of light with a distinct glow.All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series.The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).
L40 (Classic) - 40Watt 3960 lumens, Light-Emitting Diode (LED) primary lights are designed with fixed-focus light head and Li-Ion battery packs, available in the capacity range from 15,6Ah to 40,8Ah. Used water-tight switch on/off with rubber cap.The color temperature is about 6500°K, giving a light blue beam. Visibility of the spot is better even in shallow waters full of sunlight, making light communication between divers possible even in these conditions.The main feature of the head with a fixed focal length is concentrated (12°) beam of light with a distinct glow.All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series.The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).
TECHNICAL SPECIFICATIONS:
- fixed focus 12°- colour temperature: 6500°K- luminance: 3960lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,0m* long (or according to customer's order)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs
* option: E/O cord 1,0m (65cm/35cm) long (or according to customer's order)
Model
Capacity - Ah
Operating time – min
Canister - L / Ø - cm
Weight/ Weight in water - kg
Charging time – h
L4016
15,6
520
31 / 7,5
2,7 / 0,7
6
L4016 E/O
15,6
520
31 / 7,5
2,7 / 0,7
6
L4021
20,8
630
30 / 8
3,1 / 0,9
9
L4021 E/O
20,8
630
30 / 8
3,1 / 0,9
9
L4025
27,2
770
30 / 8
3,1 / 0,9
11
L4025 E/O
27,2
770
30 / 8
3,1 / 0,9
11
L40 (Classic) - 40Watt 3960 lumens, Light-Emitting Diode (LED) primary lights are designed with fixed-focus light head and Li-Ion battery packs, available in the capacity range from 15,6Ah to 40,8Ah. Used water-tight switch on/off Piezo.The color temperature is about 6500°K, giving a light blue beam. Visibility of the spot is better even in shallow waters full of sunlight, making light communication between divers possible even in these conditions.The main feature of the head with a fixed focal length is concentrated (12°) beam of light with a distinct glow.All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series.The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).
TECHNICAL SPECIFICATIONS:
- fixed focus 12°- colour temperature: 6500°K- luminance: 3960lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- Piezo switch- standard cable length 1,0m* long (or according to customer's order)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs
* option: E/O cord 1,0m (65cm/35cm) long (or according to customer's order)
75 Watt LED headlamp with the battery indicator. The LED light provides information on the current battery level. There are two independent LEDs module. E/O cord 35cm long
TECHNICAL SPECIFICATIONS:
- 75 Watt- variable angle of light- battery indicator- angels of light indicator- color temperature: 6500°K- luminance 8000- E/O cord 35cm - complete electronics in headlamp- head length: 10,5cm
The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.
When the battery is switched on, the indicator lights in one of the following modes:
green, continuous: 100 % – 16 % of charge capacityred, continuous: 15 % - 6 %red, intermittent: 5% – 0,1 %
There are two independent LEDs module."Angles of light" indicator shows a different angle of light beam.The indicator is located on the right side of the head.The modes lights work both together or separately.LED diode provides information on the current angle of light.
It lights in one of the following modes:
red - 35 Wattgreen - 40 Wattyellow- 75 Watt both channels of driver together
NOT TO BE USED ON THE SURFACE
Time of work:
L7516 (15,6 Ah)
35Watt 4:29 h
40Watt 3:51 h
75Watt 2:10 h
L7521 (20,8 Ah)
35Watt 6:41 h
40Watt 5:27 h
75Watt 2:50 h
L7525 (27,2 Ah)
35Watt 8:15 h
40Watt 6:31 h
75Watt 3:22 h
L7541 (41 Ah)
35Watt 12:25 h
40Watt 9:33 h
75Watt 4:50 h
!!! You can switch between modes by useing switch on/off. When you turn the light off, you have 5 seconds to turn it on again then the mode changes. If you turn it off for longer period (more than 5 seconds), the light will work in it's first mode (35 Watt ) !!!
75 Watt LED headlamp with the battery indicator. The LED light provides information on the current battery level. There are two independent LEDs module. E/O cord 35cm long
TECHNICAL SPECIFICATIONS:
- 75 Watt- variable angle of light- battery indicator- angels of light indicator- color temperature: 6500°K- luminance 8000- E/O cord 35cm - complete electronics in headlamp- head length: 10,5cm
The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.
When the battery is switched on, the indicator lights in one of the following modes:
green, continuous: 100 % – 16 % of charge capacityred, continuous: 15 % - 6 %red, intermittent: 5% – 0,1 %
There are two independent LEDs module."Angles of light" indicator shows a different angle of light beam.The indicator is located on the right side of the head.The modes lights work both together or separately.LED diode provides information on the current angle of light.
It lights in one of the following modes:
red - 35 Wattgreen - 40 Wattyellow- 75 Watt both channels of driver together
NOT TO BE USED ON THE SURFACE
Time of work:
L7516 (15,6 Ah)
35Watt 4:29 h
40Watt 3:51 h
75Watt 2:10 h
L7521 (20,8 Ah)
35Watt 6:41 h
40Watt 5:27 h
75Watt 2:50 h
L7525 (27,2 Ah)
35Watt 8:15 h
40Watt 6:31 h
75Watt 3:22 h
L7541 (41 Ah)
35Watt 12:25 h
40Watt 9:33 h
75Watt 4:50 h
!!! You can switch between modes by useing switch on/off. When you turn the light off, you have 5 seconds to turn it on again then the mode changes. If you turn it off for longer period (more than 5 seconds), the light will work in it's first mode (35 Watt ) !!!
Yellow Diving Thumb Loop - only for YD Goodman handle
Yellow Diving Daumenschlaufe - nur für YD Goodman handle passendLieferumfang nur die Kunststoff- Daumenschlaufe !