Side Mount LED Lampen

L20 SideMount (Classic) - 20Watt 1700 lumens, Light-Emitting Diode (LED) primary lights are designed with fixed-focus light head and Li-Ion battery packs, available in the capacity range from 10,4Ah to 24,8Ah. Used water-tight switch on/off with rubber cap.The color temperature is about 6500°K, giving a light blue beam. Visibility of the spot is better even in shallow waters full of sunlight, making light communication between divers possible even in these conditions.The main feature of the head with a fixed focal length is concentrated (10 °) beam of light with a distinct glow.All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series.The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).     TECHNICAL SPECIFICATIONS: - SideMount configuration- fixed focus 10°- colour temperature: 6500°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,2m* long (or according to customer's order)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,2m (85cm/35cm) long (or according to customer's order)          Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h SM L2010 10,4 300 24 / 7,5 2,3 / 0,6 4  SM L2010 E/O 10,4 300 24 / 7,5 2,3 / 0,6 4 SM L2016 15,6 520 31 / 7,5 2,7 / 0,7 6 SM L2016 E/O 15,6 520 31 / 7,5 2,7 / 0,7 6 SM L2021 20,8 630 30 /  8 3,1 / 0,9 9 SM L2021 E/O 20,8 630 30 / 8 3,1 / 0,9 9 SM L2025 24,8 770 30 / 8 3,1 / 0,9 11 SM L2025 E/O 24,8 770 30 / 8 3,1 / 0,9 11

PERCH L20 SideMount (Piezo) - 20Watt 1700 lumens, Light-Emitting Diode (LED) primary lights are designed with fixed-focus light head and Li-Ion battery packs, available in the capacity range from 10,4Ah to 40,8Ah. Used water-tight piezo push-button switch.The color temperature is about 6500°K, giving a light blue beam. Visibility of the spot is better even in shallow waters full of sunlight, making light communication between divers possible even in these conditions.The main feature of the head with a fixed focal length is concentrated (10 °) beam of light with a distinct glow.All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series.The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).     TECHNICAL SPECIFICATIONS: - SideMount configuration- fixed focus 10°- colour temperature: 6500°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- Piezo switch- standard cable length 1,2m* long (or according to customer's order)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,2m (85cm/35cm) long (or according to customer's order)                              Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h PERCH SM L2010 10,4 300 24 / 7,5 2,3 / 0,6 4  PERCH SM L2010 E/O 10,4 300 24 / 7,5 2,3 / 0,6 4  PERCH SM L2016 15,6 520 31 / 7,5 2,7 / 0,7 6 PERCH SM L2016 E/O 15,6 520 31 / 7,5 2,7 / 0,7 6 PERCH SM L2021 20,8 630 30 /  8 3,1 / 0,9 9 PERCH SM L2021 E/O 20,8 630 30 / 8 3,1 / 0,9 9 PERCH SM L2025 27,2 770 30 / 8 3,1 / 0,9 11 PERCH SM L2025 E/O 27,2 770 30 / 8 3,1 / 0,9 11

LH20 SideMount (two toggle switches) primary diving light series with Light-Emitting Diode (LED) lighting technology 20Watt 1700 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 24,8Ah. Used water-tight toggle switch. Cechą charakterystyczną głowicy reflektora o zmiennej ogniskowej jest poświata, jaką daje reflektor, gdy skupimy światło. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   TECHNICAL SPECIFICATIONS:   - SideMount configuration- fixed focus - colour temperature: 6500°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,2m* long (or according to customer's order)- heating cable length: 85cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs * option: E/O cord 1,0m (85cm/35cm) long (or according to customer's order)          Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h PERCH SM LH 2021 20,8 560 28 /  8 3,1 / 0,9 9 PERCH SM LH 2021 E/O 20,8 560 28 / 8 3,1 / 0,9 9 PERCH SM LH 2025 24,8 630 28 / 8 3,1 / 0,9 11 PERCH SM LH 2025 E/O 24,8 630 28 / 8 3,1 / 0,9 11    

PERCH LH20 SideMount (Piezo) primary diving light series with Light-Emitting Diode (LED) lighting technology 20Watt 1700 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 24,8Ah. Used water-tight piezo push-button switch. Cechą charakterystyczną głowicy reflektora o zmiennej ogniskowej jest poświata, jaką daje reflektor, gdy skupimy światło. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   TECHNICAL SPECIFICATIONS:   - SideMount configuration- fixed focus - colour temperature: 6500°K- luminance: 1700lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,2m* long (or according to customer's order)- heating cable length: 85cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs * option: E/O cord 1,0m (85cm/35cm) long (or according to customer's order)          Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h PERCH SM LH 2021 20,8 560 28 /  8 3,1 / 0,9 9 PERCH SM LH 2021 E/O 20,8 560 28 / 8 3,1 / 0,9 9 PERCH SM LH 2025 24,8 630 28 / 8 3,1 / 0,9 11 PERCH SM LH 2025 E/O 24,8 630 28 / 8 3,1 / 0,9 11

L40 (Classic) - 40Watt 3960 lumens, Light-Emitting Diode (LED) primary lights are designed with fixed-focus light head and Li-Ion battery packs, available in the capacity range from 15,6Ah to 40,8Ah. Used water-tight switch on/off with rubber cap.The color temperature is about 6500°K, giving a light blue beam. Visibility of the spot is better even in shallow waters full of sunlight, making light communication between divers possible even in these conditions.The main feature of the head with a fixed focal length is concentrated (12°) beam of light with a distinct glow.All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series.The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).     TECHNICAL SPECIFICATIONS: - fixed focus 12°- colour temperature: 6500°K- luminance: 3960lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,0m* long (or according to customer's order)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,0m (65cm/35cm) long (or according to customer's order)

PERCH L40 SideMount (Piezo) - 40Watt 3960 lumens, Light-Emitting Diode (LED) primary lights are designed with fixed-focus light head and Li-Ion battery packs, available in the capacity range from 15,6Ah to 40,8Ah. Used water-tight piezo push-button switch.The color temperature is about 6500°K, giving a light blue beam. Visibility of the spot is better even in shallow waters full of sunlight, making light communication between divers possible even in these conditions.The main feature of the head with a fixed focal length is concentrated (12°) beam of light with a distinct glow.All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series.The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).     TECHNICAL SPECIFICATIONS: - SideMount configuration- fixed focus 12°- colour temperature: 6500°K- luminance: 3960lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,2m* long (or according to customer's order)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,2m (85cm/35cm) long (or according to customer's order)

SideMount LH40 (Classic) primary diving light series with Light-Emitting Diode (LED) lighting technology 40Watt 3960 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 40,8Ah.  Used water-tight switch on/off with rubber cap. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.When the battery is switched on, the indicator lights in one of thefollowing modes:green, continuous: 100 % – 15 % of charge capacityred, continuous: 15 % - 5 %red, intermittent: 5% – 0,1 %  TECHNICAL SPECIFICATIONS: - SideMount configuration- fixed focus 12°- colour temperature: 6500°K- luminance: 3960lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- battery indicator- classic rubber cap switch- standard cable length 1,2m* long (or according to customer's order)- heating cable length: 85cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,0m (85cm/35cm) long (or according to customer's order)            Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h SM LH 4021 20,8 325 30 /  8 3,0 / 0,8 9 SM LH 4021 E/O 20,8 325 30 / 8 3,0 / 0,8 9 SM LH 4027 27,2 390 30 / 8 3,1 / 0,9 11 SM LH 4027 E/O 27,2 390 30 / 8 3,1 / 0,9 11 SM LH 4041 40,8 570 30,5 / 9 3,9 / 1 20 PERCH SM LH 2041 E/O 40,8 570 30,5 / 9 3,9 / 1 20    

PERCH SideMount LH40 (Piezo) primary diving light series with Light-Emitting Diode (LED) lighting technology 40Watt 3960 lumens  are designed with fixed-focus light head, additional on/off switch and  heating supply E/O cable and Li-Ion battery pack available in the capacity range from 20,8Ah to 40,8Ah. Used water-tight piezo push-button switch. All the electronics is now located inside the light head, what allowed to manufacture shorter  canister and gives possibility to use the same battery canister as power supply for light heads YD series and electric heating.Goodman handle is wide enough to use with dry gloves in cold waters. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering.There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double-ender bolt-snap without a need of mounting it on the cable.  When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double-ender bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines.Connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way.  The battery charger cable has long connectors with moving funnel covering the metal connector, what avoids short-circuit when connecting a charger. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport.  This type of connections makes battery pack full water-tight up to 150m. (450 fsw.)   The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.When the battery is switched on, the indicator lights in one of thefollowing modes:green, continuous: 100 % – 15 % of charge capacityred, continuous: 15 % - 5 %red, intermittent: 5% – 0,1 %  TECHNICAL SPECIFICATIONS: - SideMount configuration- fixed focus 12°- colour temperature: 6500°K- luminance: 3960lm- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- battery indicator- piezo push-button switch- standard cable length 1,2m* long (or according to customer's order)- heating cable length: 85cm ( or according to customer’s order max. 1m)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs   * option: E/O cord 1,0m (85cm/35cm) long (or according to customer's order)            Model Capacity - Ah Operating time – min Canister - L / Ø - cm Weight/ Weight in water - kg Charging time – h PERCH SM LH 4021 20,8 325 30 /  8 3,0 / 0,8 9 PERCH SM LH 4021 E/O 20,8 325 30 / 8 3,0 / 0,8 9 PERCH SM LH 4027 27,2 390 30 / 8 3,1 / 0,9 11 PERCH SM LH 4027 E/O 27,2 390 30 / 8 3,1 / 0,9 11 PERCH SM LH 4041 40,8 570 30,5 / 9 3,9 / 1 20 PERCH SM LH 4041 E/O 40,8 570 30,5 / 9 3,9 / 1 20

SM L75 (Classic) - 35Watt/40Watt/75Watt, 3600lm/ 4400lm/ 8000lumens, Light-Emitting Diode (LED) primary lights are designed with changeable focus light head and Li-Ion battery packs, available in the capacity range from 15,6Ah to 40,8Ah. Used water-tight switch on/off with rubber cap. The color temperature is about 6500°K.The main feature of the head with different angle of light beam is very narrow beam of light for underwater communication or very wide beam for wide lighting. All the electronics is located inside the light head, what allowed to manufacture shorter canister and gives possibility to use the same battery canister as power supply for light heads and electric heating Yellow Diving series. The goodman's handle is wide enough to be used in cold water with dry gloves. Threads of the height regulation screws are enforced now to avoid corrosion in salt water. Bungy line supplements the handle to allow easy changing of light-head hold while scootering. There is an eye-shaped piece of bungy line secured to the rotating ring located under the sealing gland, allowing to use a double ended bolt snap without a need of mounting it on the cable. When not in use, the light head could be temporarily attached to chest D-ring, with light beam directed downwards, without giving a dazzle. This way you can free your hands still having a dive light. Using attachments located on a goodman handle and bungy eye on rotating ring below sealing gland you can place your double ended bolt snap inside the contour of the light head, what is very useful when diving with reels and guidelines. Banana connectors between battery pack and canister cover makes storing canister and preparing for diving easier. When canister cover is put in-place, the power supply is connected in easy way. The cover could placed in two different positions – connected and not connected, what allow to secure the equipment during transport. This type of connections makes battery pack full water-tight up to 150m (450 fsw).   TECHNICAL SPECIFICATIONS: - SideMount configuration- angels of light 12°/ 120° - colour temperature: 6500°K- luminance: 3600lm/ 4400lm/ 8000lm- angels of light indicator- battery indicator- complete electronics in headlamp- completely sealed Li-Ion battery pack- over-charge, over-discharge, over-drain and short circuits protection- banana connectors- classic rubber cap switch- standard cable length 1,2m* long (or according to customer's order)- head length: 10,5cm- material: Delrin- max. operating depth: 150m- automatic charger for Li-Ion packs * option: E/O cord 1,2m (85cm/35cm) long (or according to customer's order)     Model Pojemność Ah Czas pracy – min Zasobnik - L / Ø cm Waga/ Waga pod wodą  kg Czas ładowania – h SM L7516 15,6 35W/ 295 40W/ 240 75W/ 125 31 / 7,5 2,8 / 0,7 6 SM L7516 E/O 15,6 35W/ 295 40W/ 240 75W/ 125   31 / 7,5 2,8 / 0,7 6 SM L7521 20,8 35W/ 400 40W/ 325 75W/ 170 30 / 8 3,0 / 0,8 9 SM L7521 E/O 20,8 35W/ 400 40W/ 325 75W/ 170 30 / 8 3,0 / 0,8 9 SM L7527 27,2 35W/ 495 40W/ 390 75W/ 200 30 /  8 3,1 / 0,9 11 SM L7527 E/O 27,2 35W/ 495 40W/ 390 75W/ 200 30 / 8 3,1 / 0,9 11 SM L7541 40,8 35W/ 745 40W/ 570 75W/ 290 30,5 / 9 3,9 / 1 20  SM L7541 E/O 40,8 35W/ 745 40W/ 570 75W/ 290 30,5 / 9 3,9 / 1 20    -------------------------------------------------------The battery indicator shows the level of the battery charge.Labelled "LED indicator", The LED indicator is located on the rightside of the head.The LED light indicates the battery performance status and providesinformation on the current battery level.When the battery is switched on, the indicator lights in one of thefollowing modes:green, continuous: 100 % – 15 % of charge capacityred, continuous: 15 % - 5 %red, intermittent: 5% – 0,1 % There are two independent LEDs module."Angles of light" indicator shows a different angle of light beam.The indicator is located on the right side of the head.The modes lights work both together or separately.LED diode provides information on the current angle of light.It lights in one of the following modes:green- 35 Watt/ 12°red- 40 Watt/ 120°yellow- 75 Watt both channels of driver together You can switch between modes by using switch on/off. When you turn the light off,you have 5 seconds to turn it on again then the mode changes. If you turn it off forlonger period (more than 5 seconds), the light will work in it's first mode (35 Watt,12°)

Yellow Diving Thumb Loop - only for YD Goodman handle Yellow Diving Daumenschlaufe - nur für YD Goodman handle passendLieferumfang nur die Kunststoff- Daumenschlaufe !